|
Sump Pumps | Drainage Pumps | Dewatering Pumps | Chemical Resistant Pumps |
|
|
 |
 |
 |
| Application |
Drainage of sumps, cellars, surface water, ponds, tanks, etc. Suitable for clean or dirty Water. | Dewatering or water supply. For contractor dewatering, construction sites, underground sumps and tunnels. For water containing sus- pended sand, mud and gravel. | Dewatering or water supply. For contractor dewatering, construction sites, or low water level pumping (Cooling jacket standard). For water containing suspended sand, mud and gravel. | Pumping of aggressive chemical solutions, wastewater or effluent. For industrial or municipal installations. |
| HOMA
Series |
Chromatic
Series H106,H117 H609,H617 |
H 82, H 16, |
H 500, H 700 | CH
406, CH 412, CH41O,CH411 CH426,CH446 |
| Installation |
 |
|
 |
|
| Materials |
Aluminum, Stainless Steel, Non Metallics. | Aluminum, Cast Iron, Stainless Steel. Models with rubber-coated pump casing available, | Aluminum, Stainless Steel, Cast Iron. Models with rubber-coated pump casing available. | Stainless Steel, Cast Iron. |
| Impeller |
 |
|
|
 |
|
Spherical |
1/8 to 3/8 | 1/4’ to 3/8 | 3/8 to 3/4 | 3/8 to 13/4 |
| Discharge Size |
11/4 to 11/2 | 11/4 to 4 | 11/2 to 6 | 11/4 to 21/2 |
| Motor Horsepower |
1/2t011/2HP | 1/2 to l0HP | 11/2 to 33HP | 1/2 to 3HP |
| Head Hmax |
18 to 90 ft. | 26 to 115 ft. | 50 to 230 ft. | 20 to 135 ft. |
| Flow
Qmax |
30 to 120 GPM | 70 to 750 GPM | 40 to 1300 GPM | 45 to 185 GPM |
|
Explosion Proof (optional) |
some sizes | some sizes |
|
Wastewater
Pumps
|
Non
Clog Pumps
|
Shaft
Drainage
Sewage Pumps |
Grinder
Pumps
|
Liquid
Manure Pumps
|
 |
 |
 |
 |
 |
|
Water,
effluent and non clog pumping applications where solids may be pre-
sent. Suitable for Resi- dential, Commercial, Municipal or Industrial
applications.
For wastewater, sewage, or process liquids.
|
Sewage, effluent and wastewater pumping applications. Collection systems, treatment plants, lift stations, and product transfer. For screened and un- screened raw sewage, effluents, and sludge. | Emergency pumping during repairs or floods. For unscreened sewage, effluent, or raw water. | Pressure sewer systems or high head applications for residential, commer- cial or industrial waste streams where solids size reduction is needed. For raw sewage, food processing and other soft solid applications. | Pumping of liquid manure from barns or stalls into silos or mobile tanks. Homogenization of liquid manure. Liquid manure is homogenized by an inte- gral cutter system. |
| TP 28, TP 30, IP 50,TP 70 | A
Series AM, AMX, AV, AK, STT |
AM | Barracuda
GRP 16 - 40 Barracuda GRP 58 - 117 |
AM, AMX, AV |
|
|
 |
|
|
|
| Cast
Iron. |
Cast Iron, Stainless Steel, Various Alloys. | Cast Iron. | Cast Iron, Hardened Steel. | Cast Iron, Stainless Steel. |
 |
|
 |
|
 |
| 1"
to 21/2"
|
3" to 81/2" | 3" to 5" | 3" to 4" | |
| 11/2"
to 3"
|
3" to 20" | 4" to 8" | 2" | 4" to 6" |
| 1
to5 HP |
2 to 180 HP | 6 to3OHP | 2 to 15 HP | 4 to3OHP |
| 10
to 100 ft. |
10 to 190 ft. | 40 to 80 ft. | 20 to 235 ft. | 40 to 80ff. |
| 20
to 320 GPM |
100 to 15,000 GPM | 600 to 2,200 GPM | 10 to 140 GPM | 200 to 2,000 GPM |
|
Class I Div 1 Group C & D except TP 28 |
Class I Div 1 GroupC&D | Class I Div 1 GroupC&D | Class I Div 1 GroupC&D | Class I Div 1 GroupC&D |
|
Mixed Flow Pumps | Axial Flow Pumps |
Packaged
|
Compact Packaged Sewage Pump Stations |
||||
|
|
|
 |
|
|||||
|
Application |
High volume water supply, cooling water circulation, flood control, and wastewater outflow. | Irrigation systems, high volume, low head water supply, and flood control. |
Sewage, effluent and waste water disposal from sanitary installations below sewer level. With tanks up to 500 gallons volume and 1 or 2 sub- mersible pumps. |
Sewage and waste water disposal from sanitary installations below sewer level. Complete with tank and 1 or 2 submersible pumps. | ||||
|
HOMA Series |
|
|
Various | Various | ||||
|
Installation |
|
|
|
|
||||
|
Materials |
Various Alloys. | Various AlIoys | Cast Iron, Aluminum, Stainless Steel, Galvanized Steel, Non Metallics. | Cast Iron, Aluminum, Stainless Steel, Non Metallics. | ||||
|
Impeller |
 |
|
 |
|
||||
|
Spherical Clearance |
N/A | N/A | 1" to 4’ | 1"' to 3" | ||||
|
Discharge Size |
Consult Factory | Consult Factory | 2" to 6" | 2" | ||||
|
Motor Horsepower |
to 500 HP | to 400 HP | 2 to 30 HP | 2 to 15 HP | ||||
|
Head Hmax |
20 to l50ft. | 3 to 50ft. | 20 to ll0ft. | 25 to ll0ft. | ||||
|
Flow Qmax |
3,000 to 20,000 GPM | 2,000 to 50,000 GPM | 50 to 750 GPM | 50 to 310 GPM | ||||
|
Explosion Proof (optional) |
some sizes | some sizes |
Class I Div 1 Group C & D |
Class I Div 1 Group C & D |
